HardwareX And Open Source Hardware With Co-Editor-in-chief (Joshua Pearce, PhD) HardwareX Podcasts podcast

#Tech #Santosh Pandey #Hardware #Open Source #Technology #Science #Engineering #Measure #Sensor

21:04

Step into the mysterious and visually stunning world of The Electric State as host Francesca Amiker takes you behind the scenes with the creative masterminds who brought Simon Stålenhag’s dystopian vision to life. In this premiere episode, directors Joe and Anthony Russo, stars Millie Bobby Brown and Chris Pratt, writers Christopher Markus and Stephen McFeely, and producers Angela Russo-Otstot and Chris Castaldi reveal how they transformed a haunting graphic novel into an epic cinematic experience. Watch The Electric State coming to Netflix on March 14th. Check out more from Netflix Podcasts . State Secrets: Inside the Making of The Electric State is produced by Netflix and Treefort Media.…

HardwareX Podcasts «
HardwareX and Open Source Hardware with co-Editor-in-chief (Joshua Pearce, PhD)

for 4 år siden 25:35

Del

MP3•Episode hjem

In this episode of HardwareX podcast, we talk to Professor Joshua Pearce who is the co-Editor-in-Chief of HardwareX. Dr. Pearce is the Thompson Chair in Information Technology and Innovation, cross-appointed in the Richard Ivey School of Business and Western University’s Department of Electrical and Computer Engineering. Dr. Pearce is a renowned expert on open hardware, low cost 3D printing, and solar photovoltaics. We talk to him about his driving motivation, projects, and vision about the future of open source hardware. This podcast episode was recorded, edited, and produced by Santosh Pandey from Iowa State University. The music is provided by Asepirawan20 from Pixabay (Upbeat Pop Day).

HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX.

25 episoder

HardwareX and Open Source Hardware with co-Editor-in-chief (Joshua Pearce, PhD)

HardwareX Podcasts

11 subscribers

published for 4 år siden

Del

MP3•Episode hjem

HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX.

25 episoder

#Tech #Santosh Pandey #Hardware #Open Source #Technology #Science #Engineering #Measure #Sensor

Alle episoder

1
Open Hardware Talks: How To NOT Reinvent the Wheel 38:47

for 13 dage siden38:47

38:47

O pen H ardware T alks is back. This series invites interdisciplinary experts and advocates to a roundtable discussion on the most relevant topics in open-source hardware. Discoverability: How To NOT Reinvent the Wheel. Open and collaborative development promises to accelerate innovation by allowing individuals and teams to share new ideas, build on top of existing ones and improve designs according to multiple use cases. So, how do you find out what is already out there? And what can make your design easier to discover for the right collaborators? In this roundtable talk, Victoria Jacua ( Open Source Medical Supplies , Global Distributed Tracking), Robin Vobruba ( Library of Open Source Hardware ), and Nathan Parker ( Open Know-How , Internet of Production Alliance ) sit down to discuss the challenges, potential and possible consequences of making an open-source hardware design more discoverable. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Reducing CO2: Using open-source technologies to scale the power of nature 26:39

for 6 weeks siden26:39

26:39

Much like plants can turn carbon into energy, researchers have been striving to scale the potential of photocatalytic CO2 reduction. Promising as the technology may be, little progress has been made to scale its potential. If the net human-caused CO2 reduction target of 45 % from 2010 levels is to be reached by 2030, the science must be shared. That is the notion that propelled Prof. Dr. Jennifer Strunk and Dr. Nikolaos Moustakas PhD , former research colleagues at the Leibniz Institute for Catalysis (LIKAT), to open-source their High-Purity Gas-solid Photoreactor design . In this episode, we journey to Rostock in the north of Germany to see the reactor in action and to unfold the possibilities and limitations of reducing carbon using the power of nature. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Tagging 6000 Bees: An Open-source System for Species Monitoring 32:52

for 11 weeks siden32:52

32:52

Did you know that honey bees dance? When honey bees return to the colony from foraging, they share info about their journey with their fellow honey bees by dancing. Besides getting the boogie on, however, little is known about how far honey bees go foraging and what ecological factors impact their journey, e.g. pesticide exposure. In this episode of HardwareX, Entomologist Margarita López-Uribe , Ph.D., specialised in bee species, together with Doctoral Student of Electrical Engineering, Diego Penaloza Aponte, of Penn State College of Agricultural Sciences, explain how open-source technologies and collaboration across scientific fields helped pave the way for an automated low-cost monitoring system - and what it takes to tag 6000 bees without getting stung. To explore the specifics, check out the hardware on HardwareX . This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Democratising Air Quality: An Open-source Solution to Filling Data Gaps in the Global South 24:22

for 14 weeks siden24:22

24:22

The advancement of low-cost sensors has sparked a boom in air quality monitoring devices. From backpack add-ons to citizen bicycles, air quality devices are enabling citizens to get involved in monitoring local air quality. When looking at global air quality maps , however, the data for South America and Africa remain scarce. As primarily consumer-based products, these devices remain subject to demand and supply, limiting access to local air quality and air pollution for those who need them the most. Though the number of open-source designs is growing, incomplete and non-standardised documentation renders many viable designs unusable. In this episode, Colombia-based Engineering Physicist, MSc., Daniel Mauricio Pineda, takes us through the design of a fully documented, open-source air quality monitoring device that allows for remote data gathering and customisation. This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Building A Better Mousetrap: Scaling animal wellbeing with open-source hardware 23:18

for 19 weeks siden23:18

23:18

What if research labs didn't have to reinvent the wheel all the time? Rodents like mice and rats play a pivotal role in neuroscientific research. Through a process known as 'head fixation', scientists surgically implant cannulas and electrodes to measure neurophysiological activity. As mice share roughly 95% of our DNA, head fixation experiments greatly contribute to advancing our understanding of the human brain and diseases like Alzheimer's and Parkinson's. While head-fixation is common in many labs, proprietary systems are often expensive and inconsistent. This leads many labs to create ad hoc DIY systems at the risk of causing harm to the research animals and impeding the results. In this episode, we sit down with Zack (Isaac) Weaver, Ph D, to explore the ethical and design-specific considerations behind his open-source head gear fixation system . With animal well-being in mind, we explore the multi-stakeholder benefits of open-source hardware in research. Open-source hardware is a collaborative effort. A special thanks to co-authors Michael R. Tadross and S. Aryana Yousefzadeh and all the labs and members who contributed to the design by trying and testing various iterations. This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
A Co-benefits Approach: Preserving more than one species with open-source hardware 27:46

for 23 weeks siden27:46

27:46

Did you know that our understanding of basic functions such as memory, learning and sleep is largely thanks to a giant sea slug? For more than 50 years, Aplysia Californica , a type of slug also known as the California Sea Hare, has been important for understanding how the nervous system works and for investigating the cellular and molecular basis of behaviour. As an essential resource for neurological disease research across the globe, there are large incentives to preserve the species, including sampling and storing its genetic material. This is easier said than done, as the Sea Hare's genetic material is both delicate and complicated to handle. Cryopreservation methods are simultaneously advancing too slowly, leaving researchers worrying that the field of neurophysiology is running out of time. Together with Marine Biologist Jack Koch , we take a look at a standardised open-hardware solution that allows for easy sampling and packaging of genetic material for cryopreservation research. Diving into the world of Aplysia Californica , we explore open-source hardware as a revenue stream, and how going open can benefit more than one species. The design published in HardwareX was made possible through work partly funded by the United States National Institutes of Health ( NIH ) Office of Research Infrastructure Programs ( ORIP ) and completed in partnership with the NIH National Aplysia Resource . This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Microwaves Against Malaria: Life-saving technologies and the question of patenting. 31:52

for 29 weeks siden31:52

31:52

Urgent needs require urgent solutions, but is open-source always the answer? The UN aims to eradicate malaria in all countries by 2030. However, in some parts of the world, incidents are increasing as the parasites transmitting the disease grow increasingly tolerant to treatment drugs. A novel treatment method using microwaves to kill the parasite shows promising results. One that could save both lives and economies in Africa, where a majority of malaria incidents and deaths are registered each year. With the release of an open-source portable device for studying the malaria parasite’s growth inhibition via microwave exposure , researchers hope to accelerate the development of a deployable treatment device sooner rather than later. In this episode of HardwareX, Biochemist and researcher Dr Carmenza Spadafora joins us from her home in Panama as she explains how quantum physics and technological innovation have paved the way for a potentially groundbreaking new method for malaria treatment. A patented method, Dr Spadafora shares her thoughts on why open-source might not always be the best choice. This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt and ComaStudio via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
High-tech Prosthetics: Granting locomotion to all with open-source robotics. 28:30

for 32 weeks siden28:30

28:30

How inclusive are advanced prosthetics technologies? The global demand for prosthetics and orthotics is only expected to rise. Yet, access to affordable and innovative solutions varies greatly at local, national and international levels. And while 3D printing has greatly contributed to making prosthetics available in low-income and developing regions, the benefits that robotics and technological innovation bring users remain highly exclusive. This may be about to change. In an attempt to make high-tech prosthetics solutions more accessible, Professor in Biomechatronics at the University of Agder in Norway, Filippo Sanfilippo , along with his colleagues (Martin Økter, Jørgen Dale, Hua Minh Tuan, Muhammad Hamza Zafar, Morten Ottestad) have published an open-source, low-cost sensorised elastic actuator design that promises to shift innovation from the market to the commons. This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt and ComaStudio via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Drones for Data Gathering: How open-source hardware is making environmental research more viable 23:18

for 45 weeks siden23:18

23:18

What does it take to make research catch up with climate change? The Arctic regions hold crucial information about the environmental impact of rising temperatures. Calving glaciers and treacherous territories make it a life-threatening mission to collect it though. As autonomous technologies improve, drones, boats and rovers are increasingly being deployed in place of humans to sample, monitor and manage marine and aquatic systems. However, as costs can range in the millions, the value these technologies can provide researchers is relevant to their cost. That is why Daniel F. Carlson and Claus Melvad put it to a group of engineering students at Aarhus University in Denmark to design a low-cost, lightweight and replicable drone for accompanying them on missions to Greenland. In this episode, we take a look at the Naval Operating Research Drone Assessing Climate Change (NORDACC) and discuss how open-source principles coupled with citizen science could accelerate climate change research - and results. This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt and ComaStudio via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
The Future of Food: (Re)growing vertical farming with open-source automation 33:16

for 47 weeks siden33:16

33:16

Why did high-tech farming go bust? Vertical Farming was one of the big new technologies of the early 2010s. By growing crops vertically with less water and no pesticides, big vertical farms promised to revolutionise food production. So why are the same vertical farms going bust across Europe and the US just ten years after they boomed? In this episode, we journey to Cambridge University in England to meet Vijja "Pat" Wichitwechkarn . An AI researcher working on agricultural robotics, he has developed a fully automated and scalable indoor farming system - MACARONS - published on HardwareX . In this episode, we address why vertical farming keeps missing the goal, and how open-source technologies could propel it to become the food tech solution we all hoped for. This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt and ComaStudio via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Open Hardware Talks: Validating openness (with OSHWA and Open Source Ecology Germany) 35:46

for 51 weeks siden35:46

35:46

Welcome to a new HardwareX podcast series: Open Hardware Talks. In addition to our regular episodes exploring open-source hardware projects, we're launching a new deep-dive series. Open Hardware Talks explores key concepts of open-source hardware in casual conversations with experts and practitioners from across the ecosystem. For the first episode in this new series, we ask: How do you validate the openness of a given hardware? To explore this, we're joined by Sid Drmay and Lee Wilkins from the Open Source Hardware Association (OSHWA) which maintains the open-source hardware certification recognised by practitioners globally, including us here at HardwareX. As a bonus, Martin Häuer from Open Source Ecology Germany (OSEG) joins to present the DIN SPEC-3105; the world's first open-source standard . Don't forget! OSHWA is also behind the annual Open Hardware Summit , the world’s first comprehensive conference on open hardware. A hybrid event, most talks and discussions are also available online. 2024 Open Hardware Summit May 3rd-4th Montreal, Canada For more info on how to join, check out the links below. Attend the Summit: https://2024.oshwa.org/attend-the-summit/ Open Hardware Summit YouTube : https://www.youtube.com/user/opensourcehardware OSHWA Discord: https://discord.com/invite/bMK7NqFWG9 This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
From Gaza to Ukraine: Exploring the Glia open-source tourniquet and scaling decentralised manufacturing during conflict 32:22

for 1 year siden32:22

32:22

How can we make life-saving medical equipment more accessible in areas under blockade, with low infrastructure, or with limited resources? In a time where almost every region in the world is seeing a rise in conflict, tourniquets have become increasingly necessary for avoiding excessive civilian casualties. Yet, proprietary tourniquets remain largely geared toward male military personnel, not women and children. Even if this changes, proprietary tourniquets remain expensive and largely inaccessible in regions where they are needed most. In this episode, Dr Tarek Loubani of Glia and Victoria Jaqua of Open Source Medical Supplies (OSMS) take us from Gaza to Ukraine as we explore the development, testing and scaling of the open-source tourniquet and the open-source tourniquet tester published on HardwareX . This episode is researched, produced and edited by Miriam Gradel, Journalist and Media Editor at HardwareX. The music is provided by Kammerin Hunt and ComaStudio via Pixabay. HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
HILO Studio for Innovations in Textile Manufacturing (with Sara Diaz Rodriguez, Natalija Krasnoperova, and Lukas Schattenhofer from Berlin, Germany) 41:58

for 3 years siden41:58

41:58

In this episode, we talk to the creators of Studio HILO that offers open source technologies for local yarn production, along with remote workshops and vocational training to facilitate user-driven experimentation. Our three guests are Sara Diaz Rodriguez (co-founder of Studio HILO, textile design and technologies consultant) , Natalija Krasnoperova (co-founder of Studio HILO, innovation and coaching consultant), and Lukas Schattenhofer (member of Open Source Ecology in Germany managing the certification program for open source hardware). The host and content creator is Dr. Sanli Faez who is an Assistant Professor of Physics at Utrecht University . The post-editing and production was handled by Dr. Santosh Pandey who is an Associate Professor in Electrical Engineering at Iowa State University . The theme music is provided by Oleksandr Savochka from Pixabay . HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Music Composition and Environmental Sensing (with Chet Udell) 44:24

for 3 years siden44:24

44:24

In this fourth episode of HardwareX Season 2 podcasts, our guest is Chet Udell who is an Assistant Professor of Biological and Ecological Engineering at Oregon State University (USA). Dr. Udell is the Director of the Openly Published Environmental Sensing (OPEnS) lab at his university. His lab is an NSF and USDA funded Makerspace led by a staff of over 30 undergraduate researchers across Electrical and Computer Engineering, Computer Science, Mechanical Engineering, Biological and Ecological Engineering, and Humanitarian Engineering. Dr. Udell is also the co-founder and CEO of Stratos Instruments, LLC and an Associate Editor of the journal HardwareX . For this episode, the host and content creator is Dr. Sanli Faez who is an Assistant Professor of Physics at Utrecht University . The post-editing and production was handled by Dr. Santosh Pandey who is an Associate Professor in Electrical Engineering at Iowa State University . The theme music is provided by Oleksandr Savochka from Pixabay . HardwareX is a peer-reviewed scientific journal about open-source hardware. For more info, visit HardwareX .…

1
Portable, open-source wireless spectrophotometer (with Katrina Laganovska from Riga, Latvia) 24:18

for 3 years siden24:18