Ep 274: Capstan Robots, Avionics of Uncertain Purpose, and What the Frack?

Hackaday Podcast

#Hackaday #Tech #3dprinting #Podcasting Education #Computer #Electronic #Robot

46:39

“If we march into that village and we start trying to persecute people for using poison, something that's very illegal, nobody's going to talk to us. We're not going to find out where the poison came from. We're not going to be able to shut anything down. We should take the approach that people are using poison because they're desperate, because they see no other alternative.” – Andrew Stein Andrew Stein is a wildlife ecologist who spent the past 25 years studying human carnivore conflict from African wild dogs and lions in Kenya and Botswana to leopards and hyenas in Namibia. His work has long focused on finding ways for people and predators to coexist. He is the founder of CLAWS , an organization based in Botswana that's working at the intersection of cutting-edge wildlife research and community driven conservation. Since its start in 2014 and official launch as an NGO in 2020, CLAWS has been pioneering science-based, tech-forward strategies to reduce conflict between people and carnivores. By collaborating closely with local communities, especially traditional cattle herders, CLAWS supports both species conservation and rural livelihoods—making coexistence not just possible, but sustainable.…

for ca. et år siden 51:15

MP3•Episode hjem

What do capstans, direct conversion receivers, and fracking have in common? They were all topics Hackaday editors Elliot Williams and Al Williams found fascinating this week. If you wonder what makes an electrical ground a ground, or what a theodolite is, you should check it out.

Al struck on on the What's That Sound, but [Ferric Bueler] didn't so he scores a highly-coveted Hackaday Podcast T-Shirt. Want one? Tune in next week for your chance.

This week, the hacks came fast and furious. Capstans, instead of gears, work well for 3D-printed mechanisms, a PI Pico can directly receive radio signals, and the guys saw a number of teardowns and reverse engineering triumphs. You'll also find solid-state heat pumps, flying wings, spectroscopy, and more.

The can't miss articles this week? Learn about theodolites, a surveying feat from ancient Greece, and how fracking works.

Head on over to Hackaday for the full links!

322 episoder

Hackaday Podcast

Ep 274: Capstan Robots, Avionics of Uncertain Purpose, and What the Frack?

Hackaday Podcast

790 subscribers

published for ca. et år siden

Del

MP3•Episode hjem

Al struck on on the What's That Sound, but [Ferric Bueler] didn't so he scores a highly-coveted Hackaday Podcast T-Shirt. Want one? Tune in next week for your chance.

The can't miss articles this week? Learn about theodolites, a surveying feat from ancient Greece, and how fracking works.

Head on over to Hackaday for the full links!

322 episoder

#Hackaday #Tech #3dprinting #Podcasting Education #Computer #Electronic #Robot

Alle episoder

Hackaday Podcast

1
Ep 317: Quantum Diamonds, Citizen Science, and Cobol to AI 1:11:12

for 4 dage siden1:11:12

1:11:12

When Hackaday editors Elliot Williams and Al Williams need a break from writing posts, they hop on the podcast and talk about their favorite stories of the past week. Want to know what they were talking about? Listen in below and find out! In an unusual twist, a listener sent in the sound for this week's What's This Sound competition, so it turns out Elliot and Al were both stumped for a change. See if you can do better, and you might just score a Hackaday Podcast T-shirt. On the hacking front, the guys talked about what they hope to see as entries in the pet hacking contest, quantum diamonds (no kidding), spectrometers, and several science projects. There was talk of a tiny robot, a space mouse—the computer kind, not a flying rodent—and even an old-fashioned photophone that let Alexander Graham Bell use the sun like a string on a paper cup telephone. Things really heat up at the end, when there is talk about computer programming ranging from COBOL to Vibe programming. In case you've missed it, Vibe programming is basically delegating your work to the AI, but do you really want to? Maybe, if your job is to convert all that old COBOL code.…

Hackaday Podcast

1
Ep 316: Soft Robots, Linux the Hard Way, Cellphones into SBCs, and the Circuit Graver 1:23:28

for 11 dage siden1:23:28

1:23:28

Join Hackaday Editors Elliot Williams and Tom Nardi as they talk about the best stories and hacks of the week. This episode starts off with a discussion of the Vintage Computer Festival East and Philadelphia Maker Faire -- two incredible events that just so happened to be scheduled for the same weekend. From there the discussion moves on to the latest developments in DIY soft robotics, the challenge of running Linux on 8-pin ICs, hardware mods to improve WiFi reception on cheap ESP32 development boards, and what's keeping old smartphones from being reused as general purpose computers. You'll also hear about Command and Conquer: Red Alert running on the Pi Pico 2, highly suspect USB-C splitters, and producing professional looking PCBs at home with a fiber laser. Stick around to the end to hear about the current state of non-Google web browsers, and a unique new machine that can engrave circuit boards with remarkable accuracy. Check out the links over on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!…

Hackaday Podcast

1
Ep 315: Conductive String Theory, Decloudified Music Players, and Wild Printing Tech 41:35

for 18 dage siden41:35

41:35

This week, Hackaday's Elliot Williams and Kristina Panos met up across the (stupid, lousy) time zones to bring you the latest news, mystery sound, and of course, a big bunch of hacks from the previous week. Again, no news is good news. On What's That Sound, Kristina didn't get close at all, but at least had a guess this time. If you think you can identify the sound amid all the talking, you could win a Hackaday Podcast t-shirt! After that, it's on to the hacks and such, beginning with a Dr. Jekyll and Mr. Hyde situation when it comes to a pair of formerly-cloud music players. We take a look at a crazy keyboard hack, some even crazier conductive string, and a perfectly cromulent list of 70 DIY synths on one wild webpage. Finally, we rethink body art with LEDs, and take a look at a couple of printing techniques that are a hundred years or so apart in their invention. Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments !…

Hackaday Podcast

1
Ep 314: It's Pi, but Also PCBs in Living Color and Ultrasonic Everything 1:11:20

for 25 dage siden1:11:20

1:11:20

It might not be Pi Day anymore, but Elliot and Dan got together for the approximately 100*Pi-th episode of the Podcast to run through the week's coolest hacks. Ultrasound seemed to be one of the themes, with a deep dive into finding bugs with sonar as well as using sound to cut the cheese -- and cakes and pies, too. The aesthetics of PCBs were much on our minds, too, from full-color graphics on demand to glow-in-the-dark silkscreens. Is automation really needed to embed fiber optics in concrete? Absolutely! How do you put plasma in a bottle? Apparently, with kombucha, Nichrome, and silicone. If you need to manage your M:TG cards, scribble on the walls, or build a mechanical chase light, we've got the details. And what exactly is a supercomputer? We can't define it, but we know one when we see it. Check out all the links over at Hackday!…

Hackaday Podcast

1
Ep 313: Capacitor Plague, Wireless Power, and Tiny Everything 55:11

for 5 weeks siden55:11

55:11

We're firmly in Europe this week on the Hackaday podcast, as Elliot Williams and Jenny List are freshly returned from Berlin and Hackaday Europe. A few days of mingling with the Hackaday community, going through mild panic over badges and SAOs, and enjoying the unique atmosphere of that city. After discussing the weekend's festivities we dive right into the hacks, touching on the coolest of thermal cameras, wildly inefficient but very entertaining wireless power transfer, and a restrospective on the capacitor plague from the early 2000s. Was it industrial espionage gone wrong, or something else? We also take a moment to consider spring PCB cnnectors, as used by both one of the Hackaday Europe SAOs, and a rather neat PCB resistance decade box, before looking at a tryly astounding PCB blinky that sets a new miniaturisation standard. In our quick roundup the standouts are a 1970s British kit synthesiser and an emulated 6502 system written in shell script, and in the can't-miss section we look at a new contender fro the smallest microcontroller, and the posibility that a century of waste coal ash may conceal a fortune in rare earth elements. Follow the links over at Hackaday .…

Hackaday Podcast

1
Ep 312: Heart Attacks, the Speed of Light, and Self-balancing 1:08:50

for 6 weeks siden1:08:50

1:08:50

Elliot does the podcast on the road to Supercon Europe, and Al is in the mood for math and nostalgia this week. Listen in and find out what they were reading on Hackaday this week. The guys talked about the ESP-32 non-backdoor and battery fires. Then it was on to the hacks. Self-balancing robots and satellite imaging were the appetizers, but soon they moved on to Kinect cameras in the modern day. Think you can't travel at the speed of light? Turns out that maybe you already are. Did you know there was a chatbot in 1957? Well, sort of. For the can't miss stories: watches monitor your heart and what does the number e really mean? Check out the links on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!…

Hackaday Podcast

1
Ep 311: AirTag Hack, GPS Rollover, and a Flat-Pack Toaster 1:04:39

for 7 weeks siden1:04:39

1:04:39

This week, Elliot Williams and Tom Nardi start off the episode by announcing Arduino co-founder David Cuartielles will be taking the stage as the keynote speaker at Hackaday Europe. In his talk, we'll hear about a vision of the future where consumer electronics can be tossed in the garden and turned into compost instead of sitting in a landfill for the next 1,000 years or so. You'll also hear about a particularly clever manipulation of Apple's AirTag infrastructure, how a classic kid's toy was turned into a unique display with the help of computer vision, and the workarounds required to keep older Global Positioning System (GPS) hardware up and running. They'll also cover DIY toasters, extracting your data from a smart ring before the manufacturer can sell it, a LEGO interferometer, and a new feature added to the Bus Pirate 5's already impressive list of capabilities. Capping off the episode there's a discussion about the surprising (or depending on how you think about it, unsurprising) amount of hardware that was on display at FOSDEM this year, and the history of one of man's most infernal creations, the shopping cart wheel lock. Check out the links over at Hackaday, and as always, tell us what you think about this episode in the comments!…

Hackaday Podcast

1
Ep 310: Cyanotypes, Cyberdecks, and the Compass CNC 41:50

for 8 weeks siden41:50

41:50

This week, Hackaday's Elliot Williams and Kristina Panos met up in a secret location with snacks to bring you the latest news, mystery sound, and of course, a big bunch of hacks from the previous week. First up in the news, and there's a lot of it: we announced the Hackaday Europe 2025 workshops and a few more speakers, though the big keynote announcement is still to come. In case you missed it, KiCad 9 moved up into the pro league, and finally, we're hiring, so come join us in the dungeon. On What's That Sound, Kristina didn't get close at all, but at least had a guess this time. That's okay, though, because nobody got it right! We're still giving a t-shirt away to [AlwaysTheWrongAnswer], though, probably because Elliot has a thing for using random number generators. Then it's on to the hacks and such beginning with a beautiful handheld compass CNC and cyanotype prints made with resin printer's UV light. After that, we take a look at open-source random numbers, a 3D-printed instant camera, and a couple of really cool cyberdecks. Finally, we discuss whether DOOM is doomed as the port of choice in this day and age, and kvetch about keyboards.…

Hackaday Podcast

1
Ep 309: Seeing WiFi, A World Without USB, Linux in NES in Animal Crossing 1:02:46

for 9 weeks siden1:02:46

1:02:46

This week Hackaday Editors Elliot Williams and Tom Nardi start things off with updates on the rapidly approaching Hackaday Europe and the saga of everyone's favorite 3D printed boat. From there they'll cover an impressive method of seeing the world via WiFi, Amazon's latest changes to the Kindle ecosystem, and an alternate reality in which USB didn't take over the peripheral world. You'll also hear about a multi-level hack that brings the joys of Linux into the world of Animal Crossing, 3D printed circuit components, and the imminent release of KiCAD 9. Stick around until the end to learn about a unique hardened glass from East Germany and the disappointing reality of modern voice control systems.…

Hackaday Podcast

1
Ep 308: The Worst 1 Ever, Google's Find My Opened, and SAR on a Drone 48:50

for 10 weeks siden48:50

48:50

It's Valentine's Day today, and what better way to capture your beloved's heart than by settling down together and listening to the Hackaday Podcast! Elliot Williams is joined by Jenny List for this week's roundup of what's cool in the world of hardware. We start by reminding listeners that Hackaday Europe is but a month away, and that a weekend immersed in both hardware hacking and the unique culture offered by the city of Berlin can be yours. The stand-out hack of the week is introduced by Elliot, Henrik Forstén's synthetic aperture radar system mounted on a cheap quadcopter, pushing the limits of construction, design, and computation to create landscape imagery of astounding detail. Most of us will never create our own SAR system, but we can all learn a lot about this field from his work. Meanwhile Jenny brings us Sylvain Munaut's software defined radio made using different projects that are part of Tiny Tapeout ASICs. The SDR isn't the best one ever, but for us it represents a major milestone in which Tiny Tapeout makes the jump from proof of concept to component. We look forward to more of this at more reasonable prices in the future. Beyond that we looked at the porting of Google Find My to the ESP32, how to repair broken zippers, and tuning in to ultrasonic sounds. Have fun listening, and come back next week for episode 309!…

Hackaday Podcast

1
Ep 307: CNC Tattoos, The Big Chill in Space, and PCB Things 48:40

for 11 weeks siden48:40

48:40

The answer is: Elliot Williams, Al Williams, and a dozen or so great hacks. The question? What do you get this week on the Hackaday podcast? This week's hacks ran from smart ring hacking, to computerized tattoos. Keyboards, PCBs, and bicycles all make appearances, too. Be sure to try to guess the "What's that sound?" You could score a cool Hackaday Podcast T. For the can't miss this week, Hackaday talks about how to dispose of the body in outer space and when setting your ship's clock involved watching a ball drop.…

Hackaday Podcast

1
Ep 306: Bambu Hacks, AI Strikes Back, John Deere Gets Sued, and All About Capacitors 59:28

for 12 weeks siden59:28

59:28

It was Dan and Elliot behind the microphones today for a transatlantic look at the week in hacks. There was a bucket of news about AI, kicked off by Deepseek suddenly coming into the zeitgeist and scaring the pants off investors for... reasons? No matter, we're more interested in the tech anyway, such as a deep dive into deep space communications from a backyard antenna farm that's carefully calibrated to give the HOA fits. We got down and dirty with capacitors, twice even, and looked at a clever way to stuff two websites into one QR code. It's all Taylor, all the time on every channel of the FM band, which we don't recommend you do (for multiple reasons) but it's nice to know you can. Plus, great kinetic art project, but that tooling deserves a chef's kiss. Finally, we wrap up with our Can't Miss articles where Jenny roots for the right to repair, and Al gives us the finger(1).…

Hackaday Podcast

1
Ep 305: Caustic Clocks, Practice Bones, and Brick Layers 51:00

for 13 weeks siden51:00

51:00

This week, Hackaday's Elliot Williams and Kristina Panos joined forces and Wonder-Twin rings to bring you the latest news, mystery sound, and of course, a big bunch of hacks from the previous week. First up in the news: Big boo to Bambu Labs, who have tried to clarify their new authentication scheme and probably only dug themselves in deeper with their customers. On What's That Sound, Kristina didn't get close at all, but at least had a guess this time. Do know what it is? Let us know, and if you're right and your number comes up, you can keep warm in a limited edition Hackaday Podcast t-shirt. Then it's on to the hacks and such beginning with a rather nice reverse-engineering of the Yamaha PRS-E433 keyboard, which led to a slice of Bad Apple playing on the tiny screen. After that, we take a look at an NES musical instrument, how to make wires explode with energy, and a really cool space mouse that uses flexures. Finally, we talk about a piece of forgotten Internet history, and a whole bunch of keyboards. Check out the links over at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!…

Hackaday Podcast

1
Ep 304: Glitching the RP2350, Sim Sim Sim, and a Scrunchie Clock 59:04

for 14 weeks siden59:04

59:04

It's podcast time again, and this week Dan sat down with Elliot for a look back at all the cool hacks we've written about. We started off talking about Hackaday Europe, which is coming up in March -- seems unlikely that it's just around the corner, but there it is. There's also good news: the Hack Chat is back, and we started things off with a bang as Eben Upton stopped by to talk all things Pi. Separately, we talked about fault injection attacks, including how to find the hidden cup of 0xC0FFEE in an RP2350. We saw a very cool piece of LED jewelry that does a fluid simulation, a direct conversion radio that's all laid out in front of you, and the scrunchiest mechanical digital clock you'll ever see. We saw blinkenlights for blinkenlights' sake, all the ways to put threads in your prints, and how to ditch to coax and wire up your antennas with Cat 6 cable. Plus, it's an Al Williams twofer in the Can't-Miss Articles, with a look back at life before GPS and how you can tune into digital ham radio, no radio required.…

Hackaday Podcast

1
Ep 303: The Cheap Yellow Display, Self-Driving Under $1000, and Don't Remix that Benchy 49:16

for 15 weeks siden49:16